Big Board For Arduino Due
Board for Arduino Due (not included ) with 15 Digital Input at 24V, 15 Digital Output at 24V (MOSFET), 4 PWM Output at 5V, 5 Analog Input at 0-10V or 4-20 mA, 1 MODBUS RS485 Port, 1 HMI Nextion Output (dedicated), 4 Stepper Motor Outputs at 5V, 2 Serial Outputs, 1 Relay Output (1 NO and 1 NC), 24V DC Power Supply. All Inputs and outputs have indicated LED.
Gearbox 50:1
Keyence Digital Pressure Sensor
The Keyence Digital Pressure GP-M Sensor is designed for both hydraulic and pneumatic applications. It has high environmental resistance, is clog resistant, and offers multiple adapters/fittings. This series monitors air/gas and liquid with a detectable range from -14.50 to 5,802 PSI. Control and analog outputs are available.
Linear Actuator
Nextion Intelligent HMI Touch Display
Nextion is a Human Machine Interface (HMI) solution combining an onboard processor and memory touch display with Nextion Editor software for HMI GUI project development. Nextion HMI display connects to peripheral MCU via TTL Serial (5V, TX, RX ,GND) to provide event notifications that peripheral MCU can act on. The Intelligent Series products have more powerful hardware in terms of MCU, Flash storage and SRAM compared with Basic Series and Enhanced Series. The audio, video and animation play functions enriches user’s project HMI interaction.
Programmed Arduino Due
The Arduino Due is a microcontroller board based on the Atmel SAM3X8E ARM Cortex-M3 CPU. It is the first Arduino board based on a 32-bit ARM core microcontroller. It has 54 digital input/output pins (of which 12 can be used as PWM outputs), 12 analog inputs, 4 UARTs (hardware serial ports), a 84 MHz clock, an USB OTG capable connection, 2 DAC (digital to analog), 2 TWI, a power jack, an SPI header, a JTAG header, a reset button and an erase button.
Programmed Arduino Portenta H7
Portenta H7 includes two processors that can run tasks in parallel. H7's main processor is the dual core STM32H747 including a Cortex® M7 running at 480 MHz and a Cortex® M4 running at 240 MHz. The Portenta family adds two 80 pin high density connectors at the bottom of the board. Order the default Arduino Portenta H7 (codename H7-15EUNWAD) that comes with STM32H747 dual-core processor with graphics engine, 8MB SDRAM, 16MB NOR Flash, 10/100 Ethernet Phy, USB HS, NXP SE050C2 Crypto, WiFi/BT Module, External Antenna and DisplayPort over USB-C
PT100 Temperature Transmitter
Sanitary Stainless Steel Pump
